HADA!!!

*Hello, All!* Subject! In short, you urgently need a program for drawing up electrical circuits, from it required: 1. Drawing up power and electronic circuits in accordance with GOST (availability of libraries and other) 2. Registration of schematic sheets according to ESKD 3. Possibility of printing, naturally, on any printer (large formats cut into pieces) 4. ALL inscriptions and other things are IN RUSSIAN and not through ass. 5. Tracing and imitation of work is not required, but is encouraged. CircutMaker, picad, orcad do not roll, according to points 1 and 4. /That’s all, All, you can scroll further.../

Hello Alexander! I am responding to your letter dated August 27, 2005, then written by Alexander Bondarenko to All, and then it was 11:03:12 on the clock. AB> Subject! In short, we urgently need a program for drawing up electrical circuits, from it AB> required: AB> 1. Drawing up power and electronic circuits in accordance with GOST (availability of libraries and AB> other) AB> 2. Registration of diagram sheets according to ESKD AB> 3. Possibility of printing, naturally, on any printer (large formats AB> cut into pieces) AB> 4. ALL inscriptions and other things are IN RUSSIAN and not written in English. AB> 5. Tracing and imitation of work is not required, but is encouraged. AB> CircutMaker, picad, orcad don’t roll, according to points 1 and 4. Rusplan!!! I uploaded it to Max, the archive weighs 1.3 MB All the best, Ilya. BoundlessJack KetchDiLife ScreenBeepGirl\n Taimyr 2.00 (c) Evgeny Varnavsky