Geum.

Hello SMT I'm for video on the V9990 chip. I’ll calmly pay 1.00 “wooden” for the card. By the way, what will be the relationship between ZX->VGA and this video card? In terms of conclusion on the PC video monitor in the capabilities of this new video card.

Hello, falanger I will continue the report on connecting "Pentagon-1024SL v2.2". Today I unsoldered the monitor using the scientific poking method. I admired the stable a picture with several unnatural colors (this is a monitor problem, I will adjust the video amplifiers myself) and scratch my head over the picture I saw. Comrade Author of the Pentagon, now they could post a screenshot of the start screen of your creation? And then I have some doubts... And also, the Reset signal wire, pin 27 of connector X3 for reset must be shorted to log 0 (case) or log 1 (+5V through 300 Ohm)?

Hello KingOfEvil Let's continue the report. I temporarily spat on the monitor and soldered a cable with a SCART for the Pentagon. And here is such a BHOPHya. The screen is gray and the menu is barely visible on it. When trying to change channels to The menu image appears for a second. Yes, on SCART through a 1.5 K resistor, + 5 V is supplied to legs 8 and 16. Maybe it's the whole thing that's buggy? Otherwise, YHTS and RGB are connected correctly, as I was already convinced of when I glanced at the menu.