couldn't resist and turned it on

Hello, DVS I'm glad the monitor works! The computer also works, but not very well, The picture shows what it shows. Pressing the power button once turning off back and forth I even went to the menu. But the computer did not respond to the buttons. Who Can you tell me why the computer is not working? And in the second photo, numbered 1 and 2, I marked two wires that go nowhere they see I wrapped them with tape so that the thread would not be shorted. All other wires soldered and lead where needed. There were two wires going to the drive. One is stuck on top into the power connector, and the second from the bottom, that is, two contacts of the drive connector along free power supply (is this correct?) And is there a difference which of these wires is in connector on the bottom, and which one on the top??? I cleaned the buttons with alcohol, the wires are all in place. KR is the one in the panel I don’t like something, it’s kind of unsightly, tattered or something. ROM and KM I took it out of the panels, rubbed the legs with alcohol and bent them on the edge of the table, so that it would be better in There was contact on the socket. But all my knowledge is basically over.... (like blew through the glass, knocked on the wheels) :v2_smile; Here....; File: aaa.jpg http://zx.pk.ru/attachment.php?attachmentid=4454 File: aaa2.jpg http://zx.pk.ru/attachment.php?attachmentid=4455