ATM Turbo repair, board version 4.50 — ZXNet «hardware.zx»

From Yuliy Trunin To All 1 October 2006

Hello razer raz> Yes, the block is from the PC, I checked it on another - the same picture look on the board to see if there is power to the mikrukhs percent ROM, etc. maybe the ROM is really dead or empty

From Dmitry Demyanenko To All 1 October 2006

Hello Lennon Well, the person seemed to say that there is no other ATM. And you can get it from the net.

From Dmitry Demyanenko To All 1 October 2006

Hello razer raz> How to check it? I don’t have another ATM to test it on. Then you need to pull out the firmware for this machine and look for people who can flash (service centers for repairing computers, mobile phones, cash registers). Since according to the symptoms there is a high probability of sclerosis. At least since a known correct ROM will be much simpler and more precise in the future revival

From Yuliy Trunin To All 1 October 2006

Hello hero her> Then you need to pull out the firmware for this machine and look for people her> which can flash it maybe poke it into the working atmka? and you can probably ask CHRV for new firmware...

From Timonin Maxim Anatolievich To All 2 October 2006

Hello hero her> Well, the person seemed to say that there is no other ATM. And you can pull it out her> neta. Specifically, I have: http://atmturbo.nedopc.com/download/shems/roms/atm103rs.zip

From razer To All 3 October 2006

Hello, Maksagor So it turns out that the ROM could clear itself over time? She's in this car It definitely worked. Now you need to find the programmer and rewrite the firmware again?

From Dmitry Demyanenko To All 3 October 2006

Hello razer It’s very desirable, otherwise you’ll only be wandering around in guesswork

From Timonin Maxim Anatolievich To All 3 October 2006

Hello razer raz> So it turns out that the ROM could have been cleared over time? In this raz> it definitely worked on the machine. Now you need to find a programmer and raz> rewrite the firmware again? What BIOS version did you have (displayed when logging into CP/M)?

From razer To All 3 October 2006

Hello, Maksagor > What BIOS version did you have (displayed when logging into CP/M)? I don’t know they gave me this computer, but on the Ver 4.50 board it says... which one can I put it?

From Timonin Maxim Anatolievich To All 4 October 2006

Hello razer raz> I don’t know this computer was given to me as a gift, but on the Ver 4.50 board it says... a raz> which one can be installed? The one I linked above: ver. 1.03. Everything above is already for ATM-turbo 2(+) (board versions 6.xx-7.xx). So they gave it to you so it didn’t work, or it worked and worked, and then broke?

From razer To All 5 October 2006

Hello, Maksagor > So they gave it to you so it didn’t work, or it worked and worked, but > then broke? They say it worked until the last moment :) It lay in my closet for 3 years.