and again about "atm" ;)
ZXNet echo conference «hardware.zx»
Hello, CHRV
CHR> This is the main problem with ATM:v2_lol;
an; No. :D the treshka doesn’t want to start. but it’s working and was bought 3 years ago
back :rolleyes:
Hello, scl^mc
scl> ah, I remembered!!! I removed the jumper from this disc-gnawer (I need it urgently
scl> was), but I don’t remember where it came from :( I’ll rummage around now, maybe I’ll find another one
scl>
This is the main problem with ATM: v2_lol:
Hello, scl^mc
scl> but no. :D the treshka doesn’t want to start. and it’s working and bought
scl> 3 years ago :rolleyes;
scl>;
I already wrote that the three-ruble note should be placed on the side where the inverted cable is
(then she will be A). Provided that no money was removed/installed from the three-ruble note
jumper and power is connected to it.
Before shipping, the board was checked exactly with three rubles, both on A and B (i.e.
on both connectors).
Hello, CHRV
CHR> Yes, yes!
CHR> Or turn the edge of the cable over backwards.
I don’t know what material the 3.5 clamps are made of (or I don’t calculate the force
:o), but they just die in batches. breakfast I'll cut a few more trash clips
(for free: D) and I’ll connect a 3.5 disk gnawing. and, accordingly, so that both
The disk drives worked and copied in parallel.
ps. By the way, I have a question: I cut the 5.25 drive to both the Leningrad and
"atm". both here and there it reads floppy disks (Leningrad really fails every now and then due to
problems with the power supply), but if you connect it to the ATM, the light is constantly
lights up red. nevertheless he reads everything... :o
pps. there will be pictures now...
ppps. added photos :)
pppps. By the way, Maxim! As far as I remember, the boot is from codebusters, which is in the photo,
determines the presence or absence of a music chip. if it is not there, there are no stripes
twitching. and they jump... :o as if there is a ym-shka... nothing on the board itself
I don't see anything like it... :o
File: 2_two_discognaws.jpg http://zx.pk.ru/attachment.php?attachmentid=4581
File: 4_some_demo.jpg http://zx.pk.ru/attachment.php?attachmentid=4582
File: 6_type_working_drive_5.25 (upside down).jpg
http://zx.pk.ru/attachment.php?attachmentid=4583
File: 3_boot_from_code_busters.jpg
http://zx.pk.ru/attachment.php?attachmentid=4584
Hello, CHRV
CHR> I already wrote that the three-ruble note should be placed on the side where the inverted one is
CHR> cable (then it will be A). Provided that it is not from three rubles
CHR> no jumpers were removed/installed and power was connected to it.
CHR> Before sending, the board was checked with three rubles and both A and
CHR> on B (i.e. on both connectors).
I connected a working 5.25 to the pressed connector in the middle - and went crazy. :D :D :D
all old floppy disks are read simply with a bang! the disk drive works like a: three
It turns out that you can also hook it in the middle so that it’s like b; walked?; :o
Hello, scl^mc
Why is the red signal output twice in the RGB connector? :o
Hello, scl^mc
scl> connected a working 5.25 to the pressed connector in the middle - and went crazy.
scl> :D :D :D all old floppy disks are read simply with a bang! floppy drive
scl> works like a: the three also turn out to be hooked in the middle so that it
scl> like b; walked?; :o
scl>
Yes, yes!
Or turn the edge of the cable over backwards.
Hello, Maksagor
> And this is normal. It’s just that the sampling signal from the mother is constantly on.
that means it's all hockey ;)
> How can you not observe? :v2_blink; :v2_jawdr:;
> WHAT IS THIS?
:v2_jawdr; :v2_jawdr:; :v2_jawdr; looked closely; - indeed a Yamaha... so
there was talk that it was taken out of the panel? (by the way, how does she sound?
comes out? :o) I don’t owe anyone anything extra for it?
> Schob bulo. For every fireman. Don't bother yourself.
>
ah... otherwise I lost sight of it a little and connected it to the ground :o I’ll have to
also put into the general pile through a resistor. look, the image is even better
will be :)
in general, it’s not a day, it pleasantly surprises me :o :o :o :D look, soon
the forum will begin to crack from the abundance of Ulyanovsk software and my lame ones
sketches :)
Hello, scl^mc
scl> ps. By the way, I have a question: I connected the 5.25 disk drive to Leningrad
scl> and to "atm". both here and there he reads floppy disks (Leningrad is true every other time
scl> is buggy due to problems with the power supply), but if you connect it to the ATM
scl> then the light is constantly red. nevertheless he reads everything... :o
And that's normal. It’s just that the sampling signal from the mother is constantly on.
> pppps. By the way, Maxim! As far as I remember, the boot is from codebusters, which
> in the photo, determines the presence or absence of a music chip. if
> it is not there - the stripes do not move. and they jump... :o as if ym-shka
> yes... I don't see anything similar on the board itself... :o
Why aren't you watching? :v2_blink; :v2_jawdr:;
What is THIS?
File: plata.jpg http://zx.pk.ru/attachment.php?attachmentid=4585
Hello, scl^mc
scl> why is the red signal output twice in the rgb connector? :o
scl>
Schob bulo. For every fireman. Don't bother yourself.
Hello, scl^mc
Well, everything worked, it’s readable and opens. thanks for the instructions :v2_cheer:
Hello, scl^mc
scl> :v2_jawdr; :v2_jawdr:; :v2_jawdr; looked closely; - indeed Yamaha...
scl> so the conversation was that it was taken out of the socket? (by the way, how
scl> is there sound coming out of it? :o) I don’t give anyone anything extra for her
scl> should?
scl>
I don't owe anything to anyone. Consider it a gift. I still have some extra lying around
Since the Ice Age, mikrukha was discovered and slapped, but he forgot to warn you. :)