smuc???

MSGID: 500:812/04.05 28e263ad ├┼e││0, All, how do you do... This is the topic. I decided to write a module for the RC so that any disk mount any partition directly in it... So problem... I have version 1.3, the screw is normal (Quantum els 85at) So, switching partitions is buggy... I mean, in all sorts of ways The program for the screw (hdd comm, shadow boot, etc) works, but I'm not here. I write: org #6000 ld a,2 ;disk "c" xor 8 ; connection via "DE" ld c,35 ld de,mnt rst #8 db #81 ret mnt db "SYSTEMpacker" I compile, launch, the screw access indicator shows I know, I fall out into the shadows, I look: the section has been cut to “C” "SYSTEMpacker", reset the computer (from the 12th floor), read the catalog "C", and there is "SYSTEMpacker" and there is no one at all... what the hell is this??? [R|MMS╬EiN] [BumFunkMC's] [Yo!] [SysOp POSTBBS] [MOBY] (c) Konstantin Lebedev/ElectroN/NightMare_Crew/SPb/Russia ..POST BBS...(812) 259-50-59...00:00-24:00...Vicomm compatible..

Hello Konstantin! September 30, 2001 (it was 00:27 then) Konstantin Lebedev in his letter to Vlad Sotnikov wrote: VS>> Read ZxNews54. In short: after a reset or contact VS>> #3D13, С=1, restored VS>> manually entered section. This bug will be fixed VS>> programming via ports. KL> I read about full connection of the partition, but I didn’t understand KL> What is CRC calculated, and where to read this emulation sector... Read it again! ;) Everything is written there... CRC is considered the last 2 bytes in a 512-byte sector. Without it, the shadow will overwrite all your connections to drives. And the sector itself is located in 2-3 sectors relative to the beginning of the screw. It depends on whether you have LBA enabled or not. This is also described in the article. But, Naturally, you only need to work through ports! Through RST 8 you do not have this sector read it. >> (c) Konstantin Lebedev/ElectroN/NightMare_Crew/SPb/Russia< Vega / ex-Style Group. 01 October 2001