Old ASMAs are urgently needed!
ZXNet echo conference «code.zx»
Hello, Strunov
You understand everything correctly, but it’s faster to do it on a PC. there are more than 160 on the site right now
sources. with BV it will take a long time, but it’s possible ;)
I immediately left this option as a backup...
Hello bugsy
Maybe I don’t understand something, but why doesn’t Best View rule?
Hello, All
Due to the fact that I shoveled http://opensourcezx.narod.ru
I decided to distribute all the sources in plain-text, i.e. so that all texts
were also in *.txt
This will make it more convenient for everyone!
If I don’t experience any special problems with ALASM, because... I work in Total Commander
there is a plugin written by Vitamin.
There are no problems with assemblers that use plain text either.
But all sorts of Masmas, Tasmas and other ZX-Asms cause me a storm of emotions!
If now someone says that you need to use FAR and xLook, I will throw a snowball at them! I
I took this ........ FAR1.70, installed it, downloaded ALL(!!!) Speccy plugins,
created the ZX folder in FARPlugins (xLook is just in FARPlugins), as written in
manually restarted FAR... AND NOTHING happened!!!! trd,scl do not open
fdi even more so!!! I tried just giving him the basic files with source codes, but
again to no avail... WHAT TO DO? NOBODY KNOWS... I'll wait until Vitamin
will write
REAL-SUPER-UNIVERSAL-VIEWER OF EVERYTHING YOU CAN-WATCH ON-SPECK
Well, let's return to the main question.
I ask you to search and post here the following instructions with manuals:
-GENS (TR-DOS)
-ISDOS-ASM
-PASM
-ZEUS (TR-DOS)
-a text editor with an asm based on ZEUS, it was called something like PRIMUS...
(they somehow brought it to us from Chelyaba)
You will provide me with invaluable help!
Hello bugsy
I don't know, but it might be useful...
File: UNICONV2.rar http://zx.pk.ru/attachment.php?attachmentid=4500
Hello bugsy
bug> why do I need a PC then
The question is just a question... ;)
Hello, Evgeny Muchkin
Of course I remember such software.
who doesn’t remember old man Krupsky?
but again it’s inconvenient and takes a long time
Why do I need a PC then?
Hello bugsy
bug> If now someone says that you need to use FAR and xLook, I’ll throw it at him
bug> snowball! I took this ........ FAR1.70, installed it, downloaded EVERYTHING(!!!)
bug> plugins for Specky, created the ZX folder in FARPlugins (xLook just in
bug> FARPlugins), as written in the manual, restarted FAR... AND NOTHING
bug> did not happen!!!! trd,scl do not open fdi even more so!!! I've been
bug> just give him basic files with source codes, but again
bug> to no avail... WHAT TO DO? NO ONE KNOWS...
throw a snowball at me and tell me more about what’s wrong with the headlights...
install only xTRD and restart the headlights. will be included in trd, fdi, udi, td0 and so on
further
In order for xLook to work, you need to copy it to the plugin folder
configure the association as described in the doc
Hello bugsy
bug> If now someone says that you need to use FAR and xLook, I’ll throw it at him
bug> snowball!
You need to use FAR and xLook :-) !!!
bug> I took this ........ FAR1.70, installed it, downloaded ALL (!!!) plugins for
bug> Specky, created the ZX folder in FARPlugins (xLook is just in FARPlugins),
bug> as written in the manual, I started FAR again... AND NOTHING
bug> happened!!!! trd,scl do not open fdi even more so!!! I've been
bug> just give him basic files with source codes, but again
bug> to no avail...
For scl, trd, fdi, just press Enter, you don’t need to configure anything.
With xLook it’s a little more complicated; it needs to be configured.
So “Commands” -> “File Associations” -> click Insert and enter:
One or more file masks: *.$?*,*.!?*
View command executed by F3; xv:!.!;
Now you can press F3 on HoBeta files or inside trd, scl, fdi, etc.
You can also look at drawings, fonts and other images, but for this you need
separate plugin theX is a plugin for a plugin, the base plugin is taken separately,
Read theX documentation for more details.
Hello, Alexandr Medvedev
Well then shoot a snowball at me too. :)
It's better to spend a little time reading the documentation and setting up FAR+ xLook.
it will pay off later. :)
Hello elf/2
I set up the association a long time ago.
By the way, I started to enter the enter after I deleted the xZXZIP.dll plugin. in
there is a problem with the language files.
Hello elf/2
elf> most likely you installed a new version of the plugin over the old one. and y
elf> their detectors are not compatible.
elf>
elf> is cured by deleting the xLook directory and unpacking the latest version
elf> to a clean directory
Thank you, I did just that. Everything worked.
Hello elf/2
elf> in order for xLook to work you need to besides copy it to
elf> plugin folder configure the association as described in the doc
But my XLook gives me an error:
File: xlook_er.jpg http://zx.pk.ru/attachment.php?attachmentid=4507
Hello caro
When I try to log into TRD I get an error:
Incorrect or damaged C:Program filesFarPlugins XXHRIPRUS.LNG
Message 39 not found
and freezes
Hello bugsy
haha cured by replacing the language file
Hello, Alexandr Medvedev
Ale> Now you can press F3 on HoBeta files or inside trd, scl, fdi, etc.
Ale>
TRD doesn't look at all inside. I go to the Alasmov text on F3 and nothing...
:v2_conf3:
Hello caro
car> And my XLook gives an error:
Most likely you installed a new version of the plugin over the old one. and they
detectors are not compatible.
can be cured by deleting the xLook directory and unpacking the latest version into a clean one
catalog
Hello bugsy
bug> TRD doesn’t look at all inside. I go to the Alasmov text on F3 and
bug> nevermind...
write down the association:
“Commands” -> “File associations” -> click Insert and enter:
One or more file masks: *.$?*,*.!?*
View command executed by F3; xv:!.!;
or stupidly go “inside” the file using Enter. there you will see the source in plain text
Hello bugsy
bug> I set up the association a long time ago.
bug> By the way, it started to enter after I installed the xZXZIP.dll plugin
bug> deleted. there is a problem in the language files.
So the question is now resolved? xlook will save opensourcezx?
Hello bugsy
Can anyone find me PASM and ZEUS?!?!?!?
Hello elf/2
that's right
will save!
Hello bugsy
bug> I took this ........ FAR1.70, installed it, downloaded ALL (!!!) plugins for
bug> Specky, created the ZX folder in FARPlugins (xLook is just in FARPlugins)
It seems like all the plugins are stupidly put in one folder.
You can’t do this, otherwise nothing will work!!!
Each plugin should be in its own xlook folder in the xLook folder, xTRD in the folder
xTRD, etc.
The types.ini file should be located in a folder one level higher than plugins.
Those. xTRD.dll is in pluginsxtrd, then types.ini is in plugins.
I hope everything is clear now?
Hello bugsy
bug> can anyone find PASM and ZEUS for me?!?!?!?
But in pasme it’s pure text?
Hello caro
car> Look, it might be what you need.
car> The tasm301.zip archive contains converters from ZEUS and from GENS to TASM.
Camille, Thank you!! I'll come and kiss you!!!
at least someone reads requests CAREFULLY and doesn’t flood...
Hello, psb
I NEED ASMA THEMSELVES!!!!!!
Hello bugsy
bug> I NEED ASMA THEMSELVES!!!!!!
Take a look, it might be what you need.
The tasm301.zip archive contains converters from ZEUS and from GENS to TASM.
File: ZEUS.zip http://zx.pk.ru/attachment.php?attachmentid=4518
File: PASM.zip http://zx.pk.ru/attachment.php?attachmentid=4519
File: tasm301.zip http://zx.pk.ru/attachment.php?attachmentid=4520
Hello bugsy
bug> I NEED ASMA THEMSELVES!!!!!!
There is a disk with the following programs:
Monitor v7.05 | Powerful disk doctor/minitor/disassembler with possible
| Be sure to look at the list of keys before starting
| management.
Gens 4B | The assembler-disassembler package is ideally suited
Mons 4B | assembled to work in TR-DOS.
Monsbeta | Mons 4B monitor code file run by
| LOAD "..." CODE, RANDOMIZE USR ...
Zeus 1990 | Version of the powerful assembler Zeus for TR-DOS.
XLAT | Converter of Zeus assembler files to text ASCII
| format.
Genius | Laser Genius assembler
Mon.L | Monitor from the same company.
If interested, write.
Hello deathsoft
interested - post it!
Hello bugsy
bug> interested - post it!
Sent by mail