boot

* Message from gate SpbZxNet<=>FidoNet. Greetings to you, O venerable All. Due to the installation of a screw on my scorp, there was a need for a boot. It is necessary that he be able to: 1.see the screw. 2.show catalogs in at least two di- skov at the same time. 3. "hot" buttons as close as possible wives to isdos. 4.opportunity to edit name and extension file extension. 5.disk full control when copying roving. Here's an idea: what if the length of the file shows- not with numbers, but with a color line in file name - for each familiar place only 32 sectors will be needed, and this will be enough exactly for filling the disk when copying NI. And then you will be able to place it on one All four disks are on the screen! Can you imagine the thrill: you mark files for three disks and copy them in one fell swoop on the OS lurking. Who dares to implement it? I'll test it for free. ;) Goodbye, Boris. -+- iS-EDIT 6.06+ + Origin: ZX SCORPIOn with engine 256Kb (812/10.00)

* Message from gate SpbZxNet<=>FidoNet. Greetings to you, O venerable All. Here I came up with a design for the future bottle: ┌─────────────────── ────────────────────┐ │ disk: A | disk:B | disk:C │ │ free: | free: | free: │ └─────────────────── ────────────────────┘ 12345678 B123 12345678 B123 12345678 B123 My boot should look something like this. The bottom tooltip is called "H" and it is removed. The device is selected using buttons "1-4" in the column where the cursor is located. The recording goes to an invisible disk. Free space is checked at the same time especially with markings. In the setup you can reassign buttons, mouse. ╔═══════════════════ ════════════════════╗ ║Copi|Ren|Del|Mov|disk|mark|All|Set|Help║ ║ 5 | 6 | 8 | 7 |1234|[ ] | 9 | 0 | ║ ╚═══════════════════ ════════════════════╝ ======cut=================== A fairly convenient thing should work out for using the screw. Goodbye, Boris. -+- iS-EDIT 6.06+ + Origin: ZX SCORPIOn with engine 256Kb (812/10.00)