Help. About the modem.

·∙° Hello, Alexandr! °∙· Monday 2001 Alexandr Kushnikov to Pavel Fedorov: PF>> What about the cable? === bite === AK> A small drive is connected in the same way as a large one. First Let's try, though I don't really want to scratch the train; if it bends, then so will the rest. will not work. but let's try. He's like B: he'll suit me quite well. for the first time, by the way, I think if something happens You can also set Lara up onls on B: AK> like B and they do not have jumpers. This shortcoming is being corrected I had an Epson one with a bunch of jumpers, and I managed to burn it, the wires there were only 2 pieces of food (you can see this if you didn’t take a bite) and the colors for me they didn't say anything besides, I thought that the plug wouldn’t fit any other way, but it’s non-standard and (already in dead drive) came in any way. AK> reverse position. There are 4 or 6 of these wires - I don’t remember exactly. AK> I don’t remember which ones exactly either - you have to look on your computer. Well, of course I'll try... : | 8 may survive :) AK> First try to connect it as B, with others AK> drives must be disconnected. If it works, we will And if you connect the rest. They won’t work with him like B: AK> Sincerely, Alexander Kushnikov aka Sander. ·∙° Good luck, Alexandr! °∙·[ZX][Palm][Beer More Often][Ascii][Read][Humor] [Palindromes][Hrust][Anime][Good campaign]

Greetings, Pavel Wed 24 Apr 2002 at 06:25:47 Pavel Fedorov -> Alexandr Kushnikov on the topic Help. About the modem. PF> Let's try, though you don't really want to scratch the train if There is no need to scratch the cable too much (I didn’t explain it in detail). You need to remove the connector cover (it has latches) and carefully use a blade to cut part of the wires lengthwise (two cut), and then disconnect them from the contacts, turn them over and place them on contacts again. PF> is bent, then the rest will not work. but let's try. PF> He's like B: he'll suit me perfectly. for the first time, by the way I PF> I think if something happens, you can set up Lara onls on B: The main thing is that you have different drives. Are you belonging to A or B? you can change it on the board. For example, I installed a switch that changes Both drives are inverted. Best regards, Alexander Kushnikov aka Sander.