Pribambas v1.2
(C) Aleksandr Majorov
This shemka to Vicomm could
respond to the call and picks up the receiver.
/
R1.1 /
o o / o o
A * C1 1mkf V
and i
n _ | | _ __ + C2 c
and | | 100mkf o
I am 100 90V m
o / \ m
/ \ O o o P2
\ /
\ /
o
10K
o ___
\ ___ O +5 B
\ R2.1
o \ o o Ring
P1
kt315
5.1K / o +12 B
___ __ /
ON_LINE \
/ Emitter
Signal "ON_LINE" - control the line
("Tube" removed / put).
Connected on 5-th digit of the port # FE
(12 output m / s 35 on the circuit Scorpion)
"Ring" - Ring Tone. In the presence of
Ringing earthed.
Connected on 5-th digit of the port # FE.
(Signal DSR, concluded on b24 control port)
Relay P1: RES-15 passport RS4.591.004
RES-10 paspotr RS4.524.312
Relay P2: RES-32 passport RF4.500.341
RES-22 passport RF4.500.129
If the relay P2 is not triggered until the end
the first alarm call, should be replaced
capacitor C1 to the other with a capacity of
1.5 - 2 times greater, or use the relay with
lower current operation.
Diode bridge: any silicon diodes
reverse voltage of not less than 200V and the line
current of 300 mA, for example KD105B, D226V, KD205G
or diode assembly.
__________________________
