BEGINNING
Today, in this section, the program Honey Commander 1.0.
Unfortunately, it is efficient only on machines with memory
less than 128 kilobytes, but we can not ignore the 128
programs, as they become More and more, and their quality
incomparably higher than the 48's. Therefore,
Our advice to users 48K vehicles: purchase 128-e, since
128-I machine has become so necessary minimum, which is needed
for a pleasant experience. Still open
a little secret: the reason
ever-increasing flow
letters and information, soon to become
will podzagruzhaemymi during
reading and 48-s units will be
continually seek to drive, whereas the access to their older
brother, will flare up only occasionally, not
forcing the owner to contemplate the inscription "b1ZAGRUZKA
... # b0". But we have slightly away from the topic.
Shell Honey Commander (HC)
is designed as a true and
F-Commander, published in
the last issue, to facilitate
to users work with floppies.
Unlike FC, HC has a much more advanced system
menu patterned
Norton Commander for IBM. In version 1.0, which is inherently
is a demonstration, a set of functions has not realized that
yet, and makes pros. The fact that this version is not demanding
machine: it "goes" at all
Spectrum-compatible computers
memory is not below 128K. At the time the fourth edition has a
version of HC. It requires a special adaptation for every model
of computer, and often reprogram ROM. In addition, almost all
of the functions implemented have to pay: for the normal
operation of the program must have at least 256K of RAM, and
preferably 512K. The ideal case is the same
Use megabyte machines.
The fact that the program and was designed to run on machines
with such amounts of memory - it
was produced by MicroArt
specifically for computer ATM.
Turned out to be the same as in need of HC
everything. Fortunately, the program does not
complex in the adaptation: sometimes enough to flash the ROM
TR-DOS program indicated 3 bytes. However, to support
additional (Over 128K) of memory needed
special action. By the way
say, we can carry out such. So in principle, if
your car at least 256K of RAM
come with the firmware of your TRDOS (as do a very
easy - just a proposal TR-DOS to answer:
SAVE "my_dos" CODE 0,16384 <Enter>
and you have a floppy disk required
firmware).
Now, hopefully, it's clear why we have chosen to publish
the youngest of the versions of the program. A detailed
description of you will find on this disk, run from the TR-DOS
help program for HC Commando > RUN "HC_HELP" <Enter>
The very same program you can
run from the "Applications".
