DIY TIPS
- 1 -
The problem of packing a hammer does not cease
excite fans
DIY. In
grip makes propyl
hacksaw. In propyl
inserted steel
plastinka.Ruchka and plans
Stink drilled
and screwed into the hole
is called a screw. Ledge
yuschuyu part of the plate
being cut, then
sazhivayut the handle can
tray, and bend the ends
plate.
- 2 -
Hang on a wall speaker with concealed hinges not so
prosto.Chtoby this work is not taken much time and was carried
out flawlessly, "DIY" proposes to use a sheet of paper.
Initially the holes are marked on it, and already
holes are transferred from paper onto the wall.
- 3 -
Simple masking frame can be done in minutes. Materials needed
most affordable: smooth plaque, two wooden bars and two rubber
flagellum. Frame design is clear from the figure.
- 4 -
To make a circle
luyu wand (for example,
furniture spines), very
not necessarily have the
Karney machine. Sufficient
but ozavestis metal
cally plate with a corresponding
TIFA different diameters
pa. The record is based
on sponge grip, wooden
Naya harvesting sharpens
Xia and is run through
vent with model
tray.
- 5 -
For storing manifested films "DIY" offers
packing boxes in which the film is sold. They stick together
and invested in some big box or glued over with thick paper.
Lids of boxes cut is not necessary, they will be useful for the
inscriptions and, in addition, protect it from dust.
- 6 -
If you do not have to hand shears for metal,
sheet roofing iron can be quickly and neatly cut can opener. For
this sheet to bend to the cut line
and fold tapped mallets. Through the acquisition of fold
stiffness knife does not go astray a straight line.
