(C) 1997 SON / VIRTUAL HACKERS SOFTWARE.
THE PRINTER SM-6337
WITH A SCORPION ZS-256 TURBO +
__________________________________________
*
After purchasing a printer from'm having a lot of problems
with printing. SOME OF THE Them, I decided SOME remains open.
FIRST WHAT I STOLKNULSYA - this discrepancy ports on the
printer and computer. This problem is solved quite simply. Y
ME AT THE SCORPIO Slot STANDARD-CENTRONICS, SO JUST NEED TO BUY
IN ANY iBM'SKOY OFFICE STANDARD
CABLE AND ITS resolder. THIS IS THE STANDARD CENTRONICS'A
Wiring:
1 - STROBE
2 - GND
3 - DATA 0
5 - DATA 1
7 - DATA 2
9 - DATA 3
11 - DATA 4
13 - DATA 5
15 - DATA 6
17 - DATA 7
1921 - BUSY
OTHER CONTACTS YOU DO NOT NEED.
When you install your comp is still running, try to PRINT IMAGE
FROM shadow businesses. NOW YOU CAN OPEN
PROCEDURES OF THE SCREEN ONLY in my version of TRAC. Rom (3.42)
for some reason, printed on 2 lines less than required. The
problem arose when I wanted to print the text ZX-WORD. INSTEAD
OF RUSSIAN LETTERS AND PRINT pseudographics some sort of
Shnyaga. THE CASE THAT I SEE-6337 The default KOI-8 WITHOUT
Pseudographics. ZX-WORD GETS SUPPORT
Alternate encodings. Had to rewrite DRIVER:
ORG # 5B00
NOP
JR INIT; INITIALIZATION
PUSH AF
WAIT CALL # 1F54
JR C, OK
POP AF
SCF; PUSH BREAK
RET
OK XOR A
IN A, (# FE)
RLA
JR C, WAIT; PRINTER NOT READY
POP AF
LD BC, # FFDD
OUT (C), A; OUTPUT BYTE
LD A, # 20
LD BC, # 1FFD
OUT (C), A
NOP
NOP
XOR A
OUT (C), A
RET
INIT LD A, # 1B; Switches
CALL # 5B03; printer on
LD A, # 52; ALTERNATIVE
CALL # 5B03; CODING
LD A, # 0F
CALL # 5B03
RET
There are still PROGRAM MICRO EDITOR Kovalevsky, BUT SHE DOES
NOT WANT TO INSTALL Printer driver.
Actually, I RECOMMEND PRINT TEXT
IS-DOS, only need to install DRIVER
Mscorp.lpr and put in PECHATALKE TYPE
PRINTER EPSON. THE USE OF TEXTS
With iBM (OR THE ZX-WORD) DO NOT FORGET THEM
Convert (MENU 'USER') in FORMAT
IS-EDITOR.
Now about printing graphics. Judging by the description,
SCREEN MANAGER v2.4 - A powerful program, but alas, with the
printer it does not want WORK.
IS ART STUDIO BUT IN PRESS TOO
Stretches the image. PROBABLY SHOULD
Experimenting with codes MANAGEMENT
Graphics. FIND AN INSTALLATION VERSION
ART STUDIO and experiment. IN RESPONSE
REQUEST FOR INPUT INTERFACE 255 (USER).
Here is an example DRIVERS:
ORG # 8764
; This part contains five VECTORS
START DEFW STA; ACTUALLY START
DEFW INIT; INITIALIZATION
DEFW BUSY; READY PRINTER
DEFW LPRINT; ISSUE BYTE
DEFW LENGHT; LENGTH DRIVER
INIT RET
BUSY IN A, (# FE); zero flag is OFF,
AND # 80; If the printer is busy
RET
LPRINT LD BC, # FFDD
OUT (C), A
LD A, B
AND # 1F
LD B, A
LD C, # FD
LD A, # 21
OUT (C), A
XOR A
OUT (C), A
END RET
LENGHT EQU END-START
That's all. IF YOU DECIDE ISSUES printing graphics, or
questions over the affected subject, then write to the journal.
__________________________________________
SEND TEXT in assembler ZX-ASM v3.0.
KEMEROVO 04/27/1997.
END ...
