* S T A L L *
Section * IRON * I-would return to the question
COVOX'a connection.
So two shemki:
+12 M-ma D1 - KR572PA1 (a)
January 16 X
February 1915 ¡The Amplifier
GND March 1914
S9 April 13 GND
May 12 S1 S8
S7 June 11 S2
July 10 S3 S6
September 8 S4 S5
D1
Signals S1 ... S9 corresponds to the signal output of the
printer port (RS-232) with another (or D, or otherwise) marking.
The signal from the foot of 16 m, we have D1 "hangs in the air.
This scheme was kindly provided by VMG .
And this shemka provided WOXONOM that is,
been and will be there AMADEUS'om (:-))) from FLASH.
R1
S1 ¡The Amplifier
R1 R2
S2 par:
R1 R2 R1 - 15kO
S3 R2 - 7.5kO
R1 R2
S4
R1 R2
S5
R1 R2
S6
R1 R2
S7
R1 R2
S8
R1 R2
S9
R2
/ / / /
Signals S1 .. S9 similar to the same signals in the previous
scheme. She, schemes, there are pluses and minuses:
Type COVOX'a plus or minus
Good kach.zv. Costliness
KR572PA1 (A) and m-we
Chorus. mixes. Often "broken"
Low cost Poor
Resistors mixing
Easy to Connect. channels.
Due to the fact that COVOX is a 4-channel -
LIMITED DAC, the main thing - it's the quality of the mixing
channels. In this connection, I would suggest to put mi -
kroshemny option. But due to the fact that most chips are sold
already with zgorevshimi bits, then the quality may zvyka
very lame.
