Perfect Commander - a full description of the popular file-shell.
COMPLETE DESCRIPTION OF THE PERFECT
COMMANDER version 1.52.
1. Opportunities PERFECT COMMANDER v1.52
"Short" of what can and Commander
all of which is its advantage in contrast to the existing ones.
- Supports additional memory
the most common SPECCY-compatible
Computers - ATM-TURBO, SCORPION, PROFI;
- Determines the change of the disc itself that the first
embodied in Rst7 RC128 (by the way he Commanderie
and wrote for the conclusions in the light of the Speccy
admission. What else could it be for you
interesting, so that the RC128 has been written in the same
evening, when, and conceived). Then, this technique could
surprise the world, Now it is just a necessity, due to both
convenience and correctness of the file shell. And most
importantly! The same paternal care so too
overwrought muscles of the user's fingers do not come off of
the pedal FIRE;
- When copying itself also determines
removable disc (which, incidentally, sold for the first time);
- Eliminates the possibility of entanglement
drive while copying (by checking
checksum of all nine sectors of the disk directory) is not
correctly implemented in Jemmini Commander (entry in the
directory some bytes if DESTINATION-ROM);
- A single function does not spoil the situation
cursor (except, of course, the keys to move and Change disk);
- Has the print driver - 64 characters in
line that allows us to derive 60 files with
complete information about the current file, or 14
files with information about each, and all
that have as complete information on the system disk area and
the value of selectors and 5 lines for ranting Commander as
with you and with himself;
- All of the digital output value or
decimal or hexadecimal number systems;
- Before each function checks whether the apparent our
directory of your drive while it is in the drive, which
eliminates a very pleasant opportunity to get him a legacy of
his predecessor's catalog;
- Every time you write the buffer to
drive (copying files), change the directory DESTINATION drive;
- Allows copying files in the order they appear in the
catalog and in selected order. One caveat: if you
want to change the order of the files on disk without the need
for auxiliary (ie perekopirovat files on working disk in a
different order), keep in mind one vile erroneous situation
from me dependent. The fact is that if you have all
selected files at one time did not fit in the buffer, there is
a possibility mashing is not reading the file.
- When perekopirovanii files at work
drive (copying to the same disk), it is necessary
just click once <ENTER> (to indicate DESTINATION-disk), because
more stupid Questions about changing discs is not given;
- Allows you to see in what order
labeled files;
- Before copying asked to check the DESTINATION-drive or
not. In most Commnader'ov is compulsory testing, which makes up
one file size in some sectors, just flour, which is why some
people and I was those (earlier), just topchat RESET and
use the services of TR-DOS'noy function COPY s "NameFile";
- Allows you to copy files from one and
the same name, which is necessary for their
transportation from one drive to another, and especially - for
long distances, when you can do in the way a lot of miles and
pleasantly surprised that your disk drive refuses to accept
just those files that you have brought;
- Allows you to see deleted files
as in the middle of the catalog and in the end, and
also copy them;
- File deleted in the middle of restoring
pereimenovaniem.Chto As delete files in the catalog, now widely
used Jemmini Commander is incorrect, because he registers the
name of the first byte of 0 and 1;
- Works with the mask in two modes:
difference between large and small letters and without;
- When the mask files to
its changes were marked and consistent
the new mask are labeled;
- Allows you to mark files for the mask;
- When copying or deleting one
file, you can not celebrate;
- Any operation can be interrupted by pressing
BREAK (but do not recommend this practice for
MOVE and COPY mode "Saving");
- Allows you to run CODE-files
change the load address and the address of the start;
- You can view any of the files
a SCREEN. And, if this screen (6912
B), then loaded with attributes if the file length> = 6144,
Georgia 6144 bytes (The screen with no attributes), but if
length < 6144, then loaded the file from its length.
This function is useful for viewing SCREEN'ov and FONT'ov the
display format;
- Allows you to pour a bunch of files. Moreover, if the
total length files <256 sectors, then a single file, if more,
then formed as many files as to the principle: everything
except the last one - 255-sectors, and the last - length equal
to the residue.
- Has a calculator that allows you to perform addition,
subtraction, multiplication and division with numbers in
decimal, and hexadecimal number systems, and the operation of
translation in the "opposite" number system;
- Works on hotkeys;
- Does not clog your business directory
card (Jemmini Commander and others);
- Does not put in the uncomfortable position of the user,
exposing his sanity questioned questions like:
Run the file? Incidentally, in the PC,
If you wish to run the file after the dialogue with <ENTER>,
then simply press BREAK and everything will be okay because
before any function that radically changes the work of
Commander is rereading the directory to verify compliance
KATALOG_DISKA - KATALOG_PC;
2. HOT KEYS
CS +1 - Change the drive. Instead <ENTER>
You can again press the CS +1;
SS +3 - Change the number system
(HEX / DEC) on the opposite
the derivation of the numbers;
SS + CS - Changing the output files:
- 60 files of information on one
- 14 files with information about each
F - Set the mask for you
usual location. The symbol "" Lake
commencement of any character;
B - Setting the mask ;
A - Setting the mask <>;
CS + D - Show (+) or output (-)
Deleted fayly.Znak <+> or <->
displayed immediately after the information
the number of deleted files;
CS + A - Output mode all 128 faylov.Ne
go around to rescue files succeeded
lennyh of the catalog. It
also work and <F>. Fai
ly deleted in the end can only
to mark and copy. After
copying the first bytes of them has
neither will be replaced by "?";
CS + F - Change the mode of perception masks
pointed to by selector
<Mask>:
N - take the mask in the form
as it is.
not equal
E - do not pay attention to what
what letters - large or
small.
equal
.
At and no effect;
SS + K - Tagging files for the mask;
SS + J - unmarking files on a mask;
R - Rename the file and restoring the
update folder of deleted files;
T - Renaming a title drive;
D - Delete Files. If marked
files are missing, then removed
(If possible) the current;
C - Copy faylov.Esli marked
nye files are missing, then copies
is current. After selecting a discrete
kovoda you will be asked whether you want
or do not want to check out DESTI
NATION-ROM. If all selected
files to fit on a disc, then
If you checked DESTINATION
drive, you will be shown what
files are placed on it and the floor
Chita question to continue copying
of or not. Otherwise
(If no test DESTINA
TION-disk) files that are on
townspeople, will be copied and
Also copy those names to
toryh on the disc are already available; Vause
You can copy files deleted
GOVERNMENTAL in the middle of the catalog (re
Suppose ), and at the end of the kata
log (mode ) with replacement
first character of name to "?";
CS +0 - Changing the tagging of files.
Showing selector <Mark>:
N - in whatever order you not to
Might files, they will rate
revel in the order they are located
expansion in the catalog;
E - files are copied to the
the order in which you have them
noted.
After copying Mark = N;
SS +0 - Viewing the order in which marked
Ny files. In this mode, the work
Hotkeys , ;
M - MOVE (the freeing of disk
space occupied by deleted
GOVERNMENTAL files). Moved fi
ly displayed;
S - Displays the code files on the screen;
Z - Merge group faylov.Fayly under
underlying merger should be
labeled, to go one by one and
between them should not be succeeded
lennyh (Do not forget to pay
attention to the mask and being
tion of deleted files). In about
Otherwise, you will receive from
communication error. If the total
length of the file can not formulate
approximated by a single file, their formation
induces as much as necessary
can on principle - to 255 sectors
all the files except the last time
example of a ostatok.Imya first fi
LA is not changed, and subsequent
exactly the same, and have the type of
"1" through "9";
CS + L - Calculator working simultaneously
Meno, both in decimal and in
hexadecimal schis
representation with the numbers in diappazonov from
0 to 65535 and can perform
operations: addition (+), subtraction
(-), Multiplication (*), integer
division (/) and transfer to another
number system (=). Result
issued in the current system schis
tion (except, of course ,(=)).
For example, the current system
notation - a decimal:
# 20 +16 <ENTER>
48-10 <ENTER>
38 * # 00b <ENTER>
418 / # 1A <ENTER>
16 = <ENTER>
# 10
Exiting the calculator on SS + SP;
Q - Output in TR-DOS with an automatic
running the file named "boot";
H - HELP with a brief description of hot
keys;
CS + SP - Interruption of any operation.
3. Input options
CS +1 - Returns the previous value;
CS +2 - Inserting a space-shift line
right;
CS +5 - Cursor left;
CS +6 - The cursor at the beginning;
CS +7 - point at the end;
CS +8 - cursor to the right;
CS +9 - Removing a character from a position of chickens
Sor-shift line position
tion that follows the cursor to the left;
CS +0 - backspace character to the left of the cursor;
CS + SS - Enter the symbol "" (in operations
input masks).
Invalid input is signaled by staining the curb red.
4. Cursor control
Top - CS +7,9
Down - CS +6,8, O
Left - CS +5,6, I
Right - CS +8,7, P
Tagging files - CS +9,0
6. What promises in PC2.0:
- Certainly the most sacred - Correction
bugs found in PC1.52;
- Implementation of the recommendations, if any
will and will not argue with the correct
work envelope;
- Perhaps the show. ZIP files, if
someone so desires (overlay in the model
nokode);
- And, of course, most importantly,
need Commander'u - Disk Doktor. Short
to its author's idea:
- The screen will be located a
sector, not the half of it;
- 3 modes of operation, distinguished by
content of the information in one
line:
- 16 bytes of code, 16 of the
their characters;
- Dump of 64 characters;
- Disassembler with the possibility of
I mnemonics, etc. etc.;
- But the truth is - it will be
something like the STS but did not work
memory, and with the disk area.
7. Differences from PC1.5
- Fixed bug with MOVE (in the regime
"128 files" in addition to the necessary fi
fishing metilis and files deleted
end;
- Fixed CONCAT (spoiled the end of the kata
log);
- 128-s-ki @ run as 128-e, and
not as a 48-e;
- Looking screen when not taken into account
the possibility of disk errors;
- Powered by Scorpion'e (port 8 th
Page required for Ser
vismonitora).
P.S.:
Who are interested in this and other Commanderie: Conver
v.4.23 (or later), Fcom 4.1, Fcom 4.1 mouse, BComabndr, Jemmy
3.0, well and others that I I can find a host can call at
tel.65-05-67.
Specifically for the Micro.
Mihail (MIHEICH).
Other articles:
|
|
|
|
Perfect Commander - a full description of the popular file-shell.
|
|
|
